| 75035A Franke Slewing Ring Bearings | d:20 mm; r, r1,2 min.:0.3 mm; F:25 mm; B:30 mm; Mass inner ring:0.04 kg; |
| 26 0411 01 Rollix Slewing Ring Bearings | Fw:20 mm; Limiting speed:20000 r/min; Mass needle roller and cage assembly:0.027 kg; Ew:28 mm; Reference speed:18000 r/min; Basic dynamic load rating C:22.9 kN; U:20 mm; Basic static load rating C0:28.5 kN; Fatigue load limit Pu:3.45 kN; |
| 6 04 Rollix Slewing Ring Bearings | d2 ≈:82.9 mm; B:40 mm; d:75 mm; D:105 mm; Operating clearance factor k2:0.142; Da max.:100 mm; s2 max.:5 mm; Basic dynamic load rating C:166 kN; D1 ≈:96.1 mm; Fatigue load limit Pu:30 kN; Mass bearing:3.9 kg; Basic static load rating C0:232 kN; da min.:79.6 mm; r1,2 min.:1 mm; Limiting speed:130 r/min; da max.:84.1 mm; Misalignment factor k1:0.083; ra max.:1 mm; |
| 22 0841 01 Rollix Slewing Ring Bearings | J min.:91 mm; Limiting speed:5000 r/min; A:32 mm; J:96 mm; Basic dynamic load rating C:10.8 kN; Recommended tightening torque for grub screw:4 N·m; J max.:101 mm; Thread grub screw G2:1/4-28 UNF; N:17.5 mm; Housing material:Composite for food a; Basic static load rating C0:6.55 kN; H1:33.3 mm; H:64 mm; Recommended diameter for attachment bolts, mm G:10 mm; L:126 mm; H2:16 mm; A5:26.3 mm; Recommended diameter for attachment bolts, inch G:0.375 in; |
| 31 0641 01 Rollix Slewing Ring Bearings | Static axial stiffness, preload class C:194 N/µm; db min.:86 mm; Static axial stiffness, preload class B:139 N/µm; Preload class A GA:240 N; Calculation factor f:1.13; Fatigue load limit Pu:2.55 kN; B:22 mm; da min.:86 mm; D2:113.95 mm; Number of balls z:20; Calculation factor f1:1; r3,4 min.:0.6 mm; Mass bearing:0.72 kg; Basic static load rating C0:61 kN; d:80 mm; rb max.:0.6 mm; d1:93.9 mm; |
| 1 088 Rollix Slewing Ring Bearings | Mass bearing (including seat washer where applicable):16.5 kg; d1 ≈:477 mm; D1 ≈:403 mm; Minimum load factor A:14; r1,2 min.:2 mm; Fatigue load limit Pu:28.5 kN; Limiting speed:1200 r/min; H:48 mm; da min.:446 mm; ra max.:2 mm; D:480 mm; Reference speed:850 r/min; Da max.:434 mm; Basic static load rating C0:1630 kN; Basic dynamic load rating C:260 kN; d:400 mm; |
| 8 0475 08 Rollix Slewing Ring Bearings | Mass bearing:1.5 kg; r3,4 min.:2 mm; Basic dynamic load rating C:138 kN; Fatigue load limit Pu:21.2 kN; Calculation factor kr:0.15; Limiting speed:7000 r/min; r1,2 min.:2 mm; da min.:91 mm; da max.:93 mm; F:95.3 mm; Basic static load rating C0:166 kN; D1 ≈:123 mm; Da max.:129 mm; B:26 mm; d:80 mm; D:140 mm; db min.:98 mm; ra max.:2 mm; s max.:1.4 mm; rb max.:2 mm; |
| 75077A Franke Slewing Ring Bearings | Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:20000 N; d:20.000 mm; Accessories:Two Seals; Oil Speed Rating n2:12000 rpm; D:52.0000 mm; B:25.40 mm; Sealed Speed Rating n3:8500 rpm; Grease Speed Rating n1:8500 rpm; Basic Dynamic Radial Load Rating C:23800 N; |
| 21 0541 01 Rollix Slewing Ring Bearings | D:52.0000 mm; B:21.00 mm; d:20.000 mm; Basic Static Radial Load Rating Co:4000 N; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:14300 N; Grease Speed Rating n1:9500 rpm; |
| 35 0541 01 Rollix Slewing Ring Bearings | h:60.325 mm; P150°:113 kN; Mass pillow block:184 kg; A2:314.325 mm; P90°:207 kN; R2:41.275 mm; R1:114.3 mm; Cap bolt recommended tightening torque:1220 N·m; RG:3/4 NPT; PG:1/4 NPT; Taconite seal (db shaft position):TER 165; Housing:SSAFS 236; Initial grease fill:1304.1 g; Cap bolt, SAE grade:8; dc:174.625 mm; P120°:127 kN; Taconite seal (dc shaft position):TER 154; Eye bolt:2 x 3/8-16 UNC; |
| 22 0641 01 Rollix Slewing Ring Bearings | r1 min.:0.6 mm; r2 min.:1 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Lubricant:Regular relubricatio; rb max.:1 mm; b1:5 mm; α:6 °; da min.:61.7 mm; Basic static load rating C0:850 kN; C:42.85 mm; Da max.:85.3 mm; Sealing solution:Triple-lip seals; ra max.:0.6 mm; M:4 mm; Da min.:79 mm; b:5.7 mm; Mass plain bearing:1.3 kg; da max.:65.2 mm; Specific dynamic load factor K:100 N/mm²; |
| 121.32.4250.990.41.1502 Standard 5 Slewing Ring Bearings | Fatigue load limit Pu:0.655 kN; Basic dynamic load rating C:21.6 kN; s1:25.4 mm; r1,2 min.:1 mm; d1 ≈:46.1 mm; Limiting speed1):3200 r/min; Basic static load rating C0:15.3 kN; Hexagonal key size for grub screw N:3.969 mm; C:19 mm; D:72 mm; Thread grub screw G2:5/16-24 UNF; d:34.925 mm; Mass complete bearing:0.45 kg; Recommended tightening torque for grub screw:6.5 N·m; Calculation factor f0:14; |