| 36 0411 01 Rollix Slewing Ring Bearings | Tolerance shaft:h8; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; B:4 mm; d:2 mm; Mass bushing:0.001 kg; Permissible sliding velocity v min.:0.25 m/s; Specific dynamic load factor K:10 N/mm²; Tolerance housing:H7; D:4 mm; Permissible sliding velocity v max.:5 m/s; |
| 38 1091 01 Rollix Slewing Ring Bearings | B5:62 mm; A:4 mm; G2:M 6; d:380 mm; G3:9 mm; Hydraulic nut:HMV 76E; d1:360 mm; d3:450 mm; B:48 mm; G:Tr 380x5; B1:164 mm; Mass adapter sleeve assembly:33.6 kg; |
| 2 0935 Rollix Slewing Ring Bearings | J max.:133 mm; N:21.5 mm; Basic dynamic load rating C:21.6 kN; H1:47.6 mm; Hexagonal key size for grub screw N:3.969 mm; d:36.512 mm; Recommended diameter for attachment bolts, inch G:0.5 in; A5:32.5 mm; J:126 mm; J min.:119 mm; Basic static load rating C0:15.3 kN; B:42.9 mm; s1:25.4 mm; Limiting speed:3200 r/min; H2:19 mm; Recommended tightening torque for grub screw:6.5 N·m; H:93 mm; Thread grub screw G2:5/16-24 UNF; |
| 27 1091 01 Rollix Slewing Ring Bearings | B:16.129 mm; d:85 mm; Mass adapter sleeve assembly:1.55 kg; G:84.836 mm; B1:83.871 mm; Threads per inch:12; Hydraulic nut:HMVC 17E; d3 max.:112.039 mm; B4:17.704 mm; d1:76.2 mm; Sleeve:S 117x3; |
| 39 0411 01 Rollix Slewing Ring Bearings | Dynamic (Cr):9 mm; rs (min):5 mm; with cylindrical bore:530 min-1; d:300 mm; Oil:361.260 kN; D:500 mm; B:160 mm; Grease:4490 kN; Static (Cor):16.7 mm; with tapered bore:630 min-1; Pu:2560 kN; |
| 121.45.5000.990.41.1502 Standard 5 Slewing Ring Bearings | d:190.000 mm; Basic Dynamic Radial Load Rating C:174000 N; B:33.00 mm; Basic Static Radial Load Rating Co:224000 N; Fillet Radius ra:2.00 mm; D:260.0000 mm; Grease Speed Rating n1:5100 rpm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:7800 rpm; |
| 39 0741 01 Rollix Slewing Ring Bearings | S:0.794 mm; Attachment bolt diameter G:4 x 19.05; J:152.4 mm; a:6.35 mm; Basic dynamic load rating C:212 kN; da:68.263 mm; N1:20.637 mm; A6:26.988 mm; A5:38.1 mm; A:69.85 mm; s:31.75 mm; L:193.675 mm; Mass bearing unit:12.9 kg; Limiting speed:2800 r/min; |
| 1 088 Rollix Slewing Ring Bearings | Mass bearing (including seat washer where applicable):16.5 kg; d1 ≈:477 mm; D1 ≈:403 mm; Minimum load factor A:14; r1,2 min.:2 mm; Fatigue load limit Pu:28.5 kN; Limiting speed:1200 r/min; H:48 mm; da min.:446 mm; ra max.:2 mm; D:480 mm; Reference speed:850 r/min; Da max.:434 mm; Basic static load rating C0:1630 kN; Basic dynamic load rating C:260 kN; d:400 mm; |
| 29 0841 01 Rollix Slewing Ring Bearings | Sealed Speed Rating n3:0 rpm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:2800 rpm; Grease Speed Rating Open/Shielded n1:2200 rpm; Basic Dynamic Radial Load Rating C:74100 N; D:240.0000 mm; d:190.000 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:91500 N; B:24.00 mm; |
| 75015A Franke Slewing Ring Bearings | PG:1/4 NPT; P180°:72.5 kN; RG:3/8 NPT; A2:165.1 mm; P60°:178 kN; PosiTrac Plus contact element (db shaft position):B10724-122; Housing:SAFS 222; P150°:59.6 kN; P90°:107 kN; Cap bolt recommended tightening torque:298.3 N·m; H:244.475 mm; End plug (suffix Y):EPR 14; A1:120.65 mm; da:110 mm; R2:31.75 mm; S:4.763 mm; Labyrinth ring (db shaft position):LOR 121; L:419.1 mm; Ca:62.789 mm; |
| 8 0405 05 Rollix Slewing Ring Bearings | B:160 mm; a:8 mm; d:150 mm; Coefficient of friction µ max.:0.15; Coefficient of friction µ min.:0.08; Mass bushing:7 kg; Specific static load factor K0:45 N/mm²; D:170 mm; α:124 °; Tolerance shaft:e7; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:0.5 m/s; h:152 mm; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; |
| 75067A Franke Slewing Ring Bearings | da min.:836 mm; Reference speed:400 r/min; D:900 mm; Basic static load rating C0:6200 kN; ra max.:3 mm; r1,2 min.:4 mm; Fatigue load limit Pu:80 kN; H:90 mm; Mass bearing (including seat washer where applicable):105 kg; d:750 mm; D1 ≈:755 mm; Limiting speed:600 r/min; Basic dynamic load rating C:741 kN; Da max.:814 mm; d1 ≈:895 mm; Minimum load factor A:210; |