| 21 1091 01 Rollix Slewing Ring Bearings | Limiting speed:20000 r/min; U:13 mm; Fw:22 mm; Basic dynamic load rating C:10.1 kN; Ew:26 mm; Reference speed:18000 r/min; Mass needle roller and cage assembly:0.0095 kg; Basic static load rating C0:16.3 kN; Fatigue load limit Pu:1.86 kN; |
| 24 1091 01 Rollix Slewing Ring Bearings | ra max.:2 mm; D:170 mm; db min.:113 mm; Mass bearing:4.7 kg; Basic static load rating C0:290 kN; F:101 mm; d:80 mm; d1 ≈:110 mm; Calculation factor kr:0.23; Fatigue load limit Pu:36 kN; Limiting speed:7500 r/min; Basic dynamic load rating C:300 kN; Axial load factor Y:0.6; D1 ≈:143.45 mm; Limiting value e:0.2; da min.:92 mm; B:39 mm; r3,4 min.:2.1 mm; Da max.:157.8 mm; Reference speed:4300 r/min; |
| 7 0849 Rollix Slewing Ring Bearings | Inner Width B:1.688 in; Outside Diameter D2:2.8346 in; Basic Dynamic Radial Load Rating:5730 lbf; Weight W:0.84 lb; Dimension S:0.689 in; D11:1.815 in; D_SEL:5/16-24; Diameter D3:1.815 in; TP:0.02 in; Basic Static Radial Load Rating Co:3440 lbf; ANGLE:135 º; Outher Width C:0.7480 in; Bore Diameter D:1 7/16 in; ZZ:0.06 in; |
| 35 0941 01 Rollix Slewing Ring Bearings | Required attachment bolt size (DIN 912):M8; Fatigue load limit Pu:8.7 kN; Number of attachment bolts:8; Basic dynamic load rating C:90 kN; H1:35 mm; d2:82.1 mm; Static moment stiffness:1520 N·m/mrad; r1,2 min.:0.6 mm; N:8.8 mm; d:60 mm; Preload:4100 N; Mass bearing:4.1 kg; da min.:82 mm; a:169 mm; Angle between holes in outer ring (Pitch) α:45 °; Angle between bolts and thread holes α/2:22.5 °; |
| 35 0541 01 Rollix Slewing Ring Bearings | h:60.325 mm; P150°:113 kN; Mass pillow block:184 kg; A2:314.325 mm; P90°:207 kN; R2:41.275 mm; R1:114.3 mm; Cap bolt recommended tightening torque:1220 N·m; RG:3/4 NPT; PG:1/4 NPT; Taconite seal (db shaft position):TER 165; Housing:SSAFS 236; Initial grease fill:1304.1 g; Cap bolt, SAE grade:8; dc:174.625 mm; P120°:127 kN; Taconite seal (dc shaft position):TER 154; Eye bolt:2 x 3/8-16 UNC; |
| 37 0841 01 Rollix Slewing Ring Bearings | B1:3 mm; Coefficient of friction µ max.:0.15; D1:25 mm; B:12 mm; Specific static load factor K0:45 N/mm²; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:0.5 m/s; α:105 °; Tolerance housing:H7; Mass bushing:0.022 kg; Coefficient of friction µ min.:0.08; d:14 mm; h:15 mm; a:3 mm; Tolerance shaft:e7; D:20 mm; |
| 35 0641 01 Rollix Slewing Ring Bearings | Initial grease fill:181.44 g; Stabilizing ring:SR-20-17; R1:58.737 mm; Cap bolt recommended tightening torque:298.3 N·m; A1:111.125 mm; da:88.9 mm; RG:3/8 NPT; P180°:57.4 kN; Cap bolt:5/8-11 UNC; J min.:295.275 mm; P90°:84.5 kN; R2:30.163 mm; H:222.25 mm; Taconite seal:TER 103; End plug (suffix Y):EPR 12; Appropriate attachment bolt size G:0.875 in; Pa:13.8 kN; S:4.763 mm; PG:1/4 NPT; |
| 7 0673 Rollix Slewing Ring Bearings | Fw:100 mm; Limiting speed:4800 r/min; Reference speed:4000 r/min; Mass needle roller and cage assembly:0.12 kg; Ew:107 mm; Fatigue load limit Pu:15.3 kN; U:21 mm; Basic static load rating C0:127 kN; Basic dynamic load rating C:45.7 kN; |
| 7 1140 13 Rollix Slewing Ring Bearings | h:15.342 mm; Associated spanner:TMFN 80-500; G:479.908 mm; Mass lock nut:30.4 kg; b:37.592 mm; Hexagonal head bolt:5/8-11x1-1/4; B5:74.6 mm; d2:525.094 mm; Threads per inch:5; d1:527.05 mm; B:60.579 mm; d3 max.:560.527 mm; |
| 3 0980 02 Rollix Slewing Ring Bearings | Sealed Speed Rating n3:3800 rpm; Basic Static Radial Load Rating Co:122000 N; d:55.000 mm; D:120.0000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:119000 N; Grease Speed Rating n1:3800 rpm; Oil Speed Rating n2:5000 rpm; B:49.20 mm; Accessories:Shield & Seal & Snap; |
| 1 0342 Rollix Slewing Ring Bearings | B:38.00 mm; Accessories:One Shield & Snap-Ri; Basic Static Radial Load Rating Co:143000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Basic Dynamic Radial Load Rating C:143000 N; Grease Speed Rating Open/Shielded n1:2400 rpm; d:160.000 mm; D:240.0000 mm; Sealed Speed Rating n3:1600 rpm; |
| 39 0641 01 Rollix Slewing Ring Bearings | L:539.75 mm; Taconite seal:TER 125; P120°:149 kN; Pa:32.7 kN; P60°:394 kN; Da:269.999 mm; Mass pillow block:117 kg; A2:276.225 mm; R2:39.688 mm; R1:95.25 mm; H1:160.35 mm; PG:1/4 NPT; Initial grease fill:623.7 g; h:50.8 mm; Housing:SSAFS 530; End plug (suffix Y):EPR 16; H:317.5 mm; RG:3/4 NPT; P150°:136 kN; Cap bolt recommended tightening torque:813.5 N·m; |